Industrial Tecnica. Cuscinetto radiale a rullini ed assiali a rulli cilindrici

Bore diameter	50 mm
Diametro esterno	140 mm
Hight	82 mm
Coefficiente di carico dinamico, assiale	172.000 N
Coefficiente di carico statico, assiale	480.000 N
coefficiente di carico dinamico, radiale	46.500 N
coefficiente di carico statico, radiale	103.000 N
Carico limite a fatica, assiale	44.500 N
Carico limita a fatica, radiale	12.700 N
Limiting speed for oil lubrication	3.100 1/min
Limiting speed for grease lubrication	1.100 1/min
Bearing friction torque	3,8 Nm
Peso	4,086 kg
Maximum diameter of housing shoulder	96 mm
Minimum diameter shaft shoulder	75 mm
Height outer ring over wave washer	51 mm
Width, outer ring	22,5 mm
Distance to lubrication hole	12,5 mm
Rip diameter shaft washer	95 mm
Width, inner ring	17,5 mm
Dimensione minima dello smusso	0,3 mm
Minimum chamfer dimension	0,6 mm
Diameter lubrication hole	6 mm
Pitch circle diameter (holes)	113 mm
Number (screwing holes)	12
Split	30 °
Temperatura d’esercizio min.	-30 °C
Temperatura d’esercizio max.	120 °C
Rigidity axial	4.600 N/µm
Tilting stiffness	2.900 Nm/mrad
Mass moment of inertia	29,8 kg * cm²
Axial runout	1 µm
Recommended INA precision locknut for radial locking (not included)	ZMA50/92
Recommended INA precision locknut for axial locking (not included)	AM50
Tightening torque nut	180 Nm
Required locknut force	36.224 N
Screw size	M10
Number of screws	12
Division (screwing holes)	30 °
Gabbia in plastica	TV

Diametro esterno

140 mm

Coefficiente di carico dinamico, assiale

172.000 N

coefficiente di carico dinamico, radiale

46.500 N

Carico limite a fatica, assiale

44.500 N

Limiting speed for oil lubrication

3.100 1/min

Bearing friction torque

3,8 Nm

Maximum diameter of housing shoulder

96 mm

Height outer ring over wave washer

51 mm

Distance to lubrication hole

12,5 mm

Width, inner ring

17,5 mm

Minimum chamfer dimension

0,6 mm

Pitch circle diameter (holes)

113 mm

Split

30 °

Temperatura d’esercizio max.

120 °C

Tilting stiffness

2.900 Nm/mrad

Axial runout

1 µm

Recommended INA precision locknut for axial locking (not included)

AM50

Required locknut force

36.224 N

Number of screws

12

Gabbia in plastica

TV

Cuscinetto radiale a rullini ed assiali a rulli cilindrici - ZARF50140-TV