Industrial Tecnica. Cuscinetto radiale a rullini ed assiali a rulli cilindrici

Bore diameter	60 mm
Diametro esterno	150 mm
Hight	82 mm
Coefficiente di carico dinamico, assiale	187.000 N
Coefficiente di carico statico, assiale	550.000 N
coefficiente di carico dinamico, radiale	44.500 N
coefficiente di carico statico, radiale	92.000 N
Carico limite a fatica, assiale	51.000 N
Carico limita a fatica, radiale	12.900 N
Limiting speed for oil lubrication	2.700 1/min
Limiting speed for grease lubrication	950 1/min
Bearing friction torque	4,2 Nm
Peso	4,51 kg
Maximum diameter of housing shoulder	106 mm
Minimum diameter shaft shoulder	90 mm
Height outer ring over wave washer	51 mm
Width, outer ring	22,5 mm
Distance to lubrication hole	12,5 mm
Rip diameter shaft washer	105 mm
Width, inner ring	17,5 mm
Dimensione minima dello smusso	0,3 mm
Minimum chamfer dimension	0,6 mm
Diameter lubrication hole	6 mm
Pitch circle diameter (holes)	123 mm
Number (screwing holes)	12
Split	30 °
Temperatura d’esercizio min.	-30 °C
Temperatura d’esercizio max.	120 °C
Rigidity axial	5.300 N/µm
Tilting stiffness	4.300 Nm/mrad
Mass moment of inertia	43,8 kg * cm²
Axial runout	1 µm
Recommended INA precision locknut for radial locking (not included)	ZMA60/98
Recommended INA precision locknut for axial locking (not included)	AM60
Tightening torque nut	250 Nm
Required locknut force	41.144 N
Screw size	M10
Number of screws	12
Division (screwing holes)	30 °
Gabbia in plastica	TV

Diametro esterno

150 mm

Coefficiente di carico dinamico, assiale

187.000 N

coefficiente di carico dinamico, radiale

44.500 N

Carico limite a fatica, assiale

51.000 N

Limiting speed for oil lubrication

2.700 1/min

Bearing friction torque

4,2 Nm

Maximum diameter of housing shoulder

106 mm

Height outer ring over wave washer

51 mm

Distance to lubrication hole

12,5 mm

Width, inner ring

17,5 mm

Minimum chamfer dimension

0,6 mm

Pitch circle diameter (holes)

123 mm

Split

30 °

Temperatura d’esercizio max.

120 °C

Tilting stiffness

4.300 Nm/mrad

Axial runout

1 µm

Recommended INA precision locknut for axial locking (not included)

AM60

Required locknut force

41.144 N

Number of screws

12

Gabbia in plastica

TV

Cuscinetto radiale a rullini ed assiali a rulli cilindrici - ZARF60150-TV