Industrial Tecnica. Cuscinetto radiale a rullini ed assiali a rulli cilindrici

Bore diameter	50 mm
Diametro esterno	115 mm
Hight	60 mm
Coefficiente di carico dinamico, assiale	90.000 N
Coefficiente di carico statico, assiale	300.000 N
coefficiente di carico dinamico, radiale	40.000 N
coefficiente di carico statico, radiale	82.000 N
Carico limite a fatica, assiale	28.000 N
Carico limita a fatica, radiale	11.500 N
Limiting speed for oil lubrication	3.600 1/min
Limiting speed for grease lubrication	1.200 1/min
Bearing friction torque	2,2 Nm
Peso	1,861 kg
Maximum diameter of housing shoulder	79 mm
Minimum diameter shaft shoulder	67 mm
Height outer ring over wave washer	40 mm
Width, outer ring	22,5 mm
Distance to lubrication hole	12,5 mm
Rip diameter shaft washer	78 mm
Width, inner ring	11,5 mm
Dimensione minima dello smusso	0,3 mm
Minimum chamfer dimension	0,6 mm
Diameter lubrication hole	6 mm
Pitch circle diameter (holes)	94 mm
Number (screwing holes)	12
Split	30 °
Temperatura d’esercizio min.	-30 °C
Temperatura d’esercizio max.	120 °C
Rigidity axial	4.800 N/µm
Tilting stiffness	2.470 Nm/mrad
Mass moment of inertia	8,42 kg * cm²
Axial runout	1 µm
Recommended INA precision locknut for radial locking (not included)	ZMA50/75
Recommended INA precision locknut for axial locking (not included)	AM50
Tightening torque nut	85 Nm
Required locknut force	18.410 N
Screw size	M8
Number of screws	12
Division (screwing holes)	30 °
Gabbia in plastica	TV

Diametro esterno

115 mm

Coefficiente di carico dinamico, assiale

90.000 N

coefficiente di carico dinamico, radiale

40.000 N

Carico limite a fatica, assiale

28.000 N

Limiting speed for oil lubrication

3.600 1/min

Bearing friction torque

2,2 Nm

Maximum diameter of housing shoulder

79 mm

Height outer ring over wave washer

40 mm

Distance to lubrication hole

12,5 mm

Width, inner ring

11,5 mm

Minimum chamfer dimension

0,6 mm

Pitch circle diameter (holes)

94 mm

Split

30 °

Temperatura d’esercizio max.

120 °C

Tilting stiffness

2.470 Nm/mrad

Axial runout

1 µm

Recommended INA precision locknut for axial locking (not included)

AM50

Required locknut force

18.410 N

Number of screws

12

Gabbia in plastica

TV

Cuscinetto radiale a rullini ed assiali a rulli cilindrici - ZARF50115-TV