Industrial Tecnica. Cuscinetto radiale a rullini ed assiali a rulli cilindrici

Bore diameter	35 mm
Diametro esterno	110 mm
Hight	66 mm
Coefficiente di carico dinamico, assiale	105.000 N
Coefficiente di carico statico, assiale	265.000 N
coefficiente di carico dinamico, radiale	27.500 N
coefficiente di carico statico, radiale	53.000 N
Carico limite a fatica, assiale	22.900 N
Carico limita a fatica, radiale	7.600 N
Limiting speed for oil lubrication	4.000 1/min
Limiting speed for grease lubrication	1.250 1/min
Bearing friction torque	2,3 Nm
Peso	1,927 kg
Maximum diameter of housing shoulder	74 mm
Minimum diameter shaft shoulder	60 mm
Height outer ring over wave washer	41 mm
Width, outer ring	18 mm
Distance to lubrication hole	10 mm
Rip diameter shaft washer	73 mm
Width, inner ring	14 mm
Dimensione minima dello smusso	0,3 mm
Minimum chamfer dimension	0,6 mm
Diameter lubrication hole	3,2 mm
Pitch circle diameter (holes)	88 mm
Number (screwing holes)	12
Split	30 °
Temperatura d’esercizio min.	-30 °C
Temperatura d’esercizio max.	120 °C
Rigidity axial	3.500 N/µm
Tilting stiffness	1.300 Nm/mrad
Mass moment of inertia	8,47 kg * cm²
Axial runout	1 µm
Recommended INA precision locknut for radial locking (not included)	ZMA35/70
Recommended INA precision locknut for axial locking (not included)	AM35
Tightening torque nut	100 Nm
Required locknut force	27.480 N
Screw size	M8
Number of screws	12
Division (screwing holes)	30 °
Gabbia in plastica	TV

Diametro esterno

110 mm

Coefficiente di carico dinamico, assiale

105.000 N

coefficiente di carico dinamico, radiale

27.500 N

Carico limite a fatica, assiale

22.900 N

Limiting speed for oil lubrication

4.000 1/min

Bearing friction torque

2,3 Nm

Maximum diameter of housing shoulder

74 mm

Height outer ring over wave washer

41 mm

Distance to lubrication hole

10 mm

Width, inner ring

14 mm

Minimum chamfer dimension

0,6 mm

Pitch circle diameter (holes)

88 mm

Split

30 °

Temperatura d’esercizio max.

120 °C

Tilting stiffness

1.300 Nm/mrad

Axial runout

1 µm

Recommended INA precision locknut for axial locking (not included)

AM35

Required locknut force

27.480 N

Number of screws

12

Gabbia in plastica

TV

Cuscinetto radiale a rullini ed assiali a rulli cilindrici - ZARF35110-TV